My desktop crashed while I was editing a job, after I logged back in I got the 'Job is being accessed by another user' message. I know the message is caused by the PC crash but I don't know how to unlock the job.
Does anyone know how to unlock a job that isn't being edited by anyone?
Thanks
ta
Job is being accessed by another user
Moderators: chulett, rschirm, roy
-
- Participant
- Posts: 3593
- Joined: Thu Jan 23, 2003 5:25 pm
- Location: Australia, Melbourne
- Contact:
It's been covered many times before, just do an archive search on unlock job for lots of threads such as this one:
viewtopic.php?t=85560
viewtopic.php?t=85560
Certus Solutions
Blog: Tooling Around in the InfoSphere
Twitter: @vmcburney
LinkedIn:Vincent McBurney LinkedIn
Blog: Tooling Around in the InfoSphere
Twitter: @vmcburney
LinkedIn:Vincent McBurney LinkedIn
Hi All,
I searched the archives on the LOGTO topic and this is what I found
Since Iam working on PX I used PXEngine instead of DSEngine and I gave the command bin/osh instead of bin/uvsh. Am I correct upto this point. Pls clarify?
When I gave the command Iam getting the following error
exec(): 0509-036 Cannot load program bin/osh because of the following errors:
0509-150 Dependent module liborchoslaix3.a(libtemp.o) could not be loaded.
0509-022 Cannot load module liborchoslaix3.a(libtemp.o).
0509-026 System error: A file or directory in the path name does not exist.
Is this because I dont have the right access or priveleges.Pls clarify?
Thanks
--Rich
For andet14: A search tool is provided.Pls follow the Search link provided above to use the search tool.
I searched the archives on the LOGTO topic and this is what I found
Code: Select all
Go to $dshome (which should be .../DSEngine)
bin/uvsh
LOGTO [project name where the job is]
DS.TOOLS
Select 5.
Select 4. Identify the job listed.
Select 1. (4 only shows the last 5 digits of the PID, use this option to
show the entire PID. This is a known bug with at least 6.0.1, but this,
again, is an undocumented feature.)
Select 7.
Enter the PID identified.
Press enter/return key a few times to return to '>'
Type QUIT
When I gave the command Iam getting the following error
exec(): 0509-036 Cannot load program bin/osh because of the following errors:
0509-150 Dependent module liborchoslaix3.a(libtemp.o) could not be loaded.
0509-022 Cannot load module liborchoslaix3.a(libtemp.o).
0509-026 System error: A file or directory in the path name does not exist.
Is this because I dont have the right access or priveleges.Pls clarify?
Thanks
--Rich
For andet14: A search tool is provided.Pls follow the Search link provided above to use the search tool.
-
- Participant
- Posts: 54607
- Joined: Wed Oct 23, 2002 10:52 pm
- Location: Sydney, Australia
- Contact:
You are not correct. Locking of design time objects is performed in the DataStage engine.Since Iam working on PX I used PXEngine instead of DSEngine and I gave the command bin/osh instead of bin/uvsh. Am I correct upto this point. Pls clarify?
You should execute neither osh nor uvsh. You should execute uv. Its pathname is $DSHOME/bin/uv (if you are on release 7.x) or `cat /.dshome`/bin/uv (if you are on releases 5.x or 6.x) or `cat /.uvhome`/bin/uv (if you are on earlier releases). In all cases, if you are on UNIX, you need first to have executed the dsenv shell script in the DataStage engine directory.
IBM Software Services Group
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.