[AD] Export/Import thro command line
Posted: Wed Feb 25, 2004 1:46 am
Hi Rohan,
we needed such a tool already in version 3.x for the export and import of
single Jobs, though it was (and is still) not available from Ascential we
wrote it ourself.
We updated this tool for version 5.x and it works also for 6.x. (7x we did
not test yet).
Our company does sell this tool, which does import, export and compile from
commandline.
Wolfgang
-----Original Message-----
From: Craig Hulett [mailto:Craig.Hulett@comcast.net]
Sent: Tuesday, February 24, 2004 4:39 AM
To: 'DataStage Users Discussion List'
Subject: RE: Export/Import thro command line
Still just one project at a time, as far as I know. However, if you go over
to Ascential's AND site, there is a batch file uploaded in their Product
Application File Library that will automatically find and export *all*
project on a server one after another. Takes a little bit to setup and isn't
quite as robust as the authors would like it to end up being, but it *does*
work.
-craig
-----Original Message-----
From: datastage-users-bounces@oliver.com
[mailto:datastage-users-bounces@oliver.com] On Behalf Of David Barham
Sent: Monday, February 23, 2004 1:48 PM
To: DataStage Users Discussion List
Subject: RE: Export/Import thro command line
Look for DSCMDIMPORT.EXE and DSCMDEXPORT.EXE where your client is installed.
As at version 5.2, it will only export an entire project. Maybe this has
improved in later versions.
-----Original Message-----
From: datastage-users-bounces@oliver.com
[mailto:datastage-users-bounces@oliver.com]On Behalf Of Rohan Kembhavi
Sent: Tuesday, 24 February 2004 3:07 AM
To: Datastage-Users (E-mail)
Subject: Export/Import thro command line
Hi All,
Can we export/import all the jobs from a category through command line.
I mean to say instead of using a DataStage Manager, can I do this through
the command prompt itself ?
Thanks & Regards,
Rohan A. Kembhavi
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
we needed such a tool already in version 3.x for the export and import of
single Jobs, though it was (and is still) not available from Ascential we
wrote it ourself.
We updated this tool for version 5.x and it works also for 6.x. (7x we did
not test yet).
Our company does sell this tool, which does import, export and compile from
commandline.
Wolfgang
-----Original Message-----
From: Craig Hulett [mailto:Craig.Hulett@comcast.net]
Sent: Tuesday, February 24, 2004 4:39 AM
To: 'DataStage Users Discussion List'
Subject: RE: Export/Import thro command line
Still just one project at a time, as far as I know. However, if you go over
to Ascential's AND site, there is a batch file uploaded in their Product
Application File Library that will automatically find and export *all*
project on a server one after another. Takes a little bit to setup and isn't
quite as robust as the authors would like it to end up being, but it *does*
work.
-craig
-----Original Message-----
From: datastage-users-bounces@oliver.com
[mailto:datastage-users-bounces@oliver.com] On Behalf Of David Barham
Sent: Monday, February 23, 2004 1:48 PM
To: DataStage Users Discussion List
Subject: RE: Export/Import thro command line
Look for DSCMDIMPORT.EXE and DSCMDEXPORT.EXE where your client is installed.
As at version 5.2, it will only export an entire project. Maybe this has
improved in later versions.
-----Original Message-----
From: datastage-users-bounces@oliver.com
[mailto:datastage-users-bounces@oliver.com]On Behalf Of Rohan Kembhavi
Sent: Tuesday, 24 February 2004 3:07 AM
To: Datastage-Users (E-mail)
Subject: Export/Import thro command line
Hi All,
Can we export/import all the jobs from a category through command line.
I mean to say instead of using a DataStage Manager, can I do this through
the command prompt itself ?
Thanks & Regards,
Rohan A. Kembhavi
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users
_______________________________________________
datastage-users mailing list
datastage-users@oliver.com
http://www.oliver.com/mailman/listinfo/datastage-users